- The term damping factor can also refer to the ratio between a source and load impedance.
Damping is any effect, either deliberately engendered or inherent to a system, that tends to reduce the amplitude of oscillations.
In applied mathematics, damping is mathematically modelled as a force with magnitude proportional to that of the velocity of the object but opposite in direction to it. Thus, for a simple mechanical damper, the force F is related to the velocity v by
- where R is the damper constant.
This relationship is perfectly analogous to electrical resistance. See Ohm's law.
In playing stringed instruments such as guitar or violin, damping is the quieting or abrupt silencing of the strings after they have been sounded, by pressing with the edge of the palm, or other parts of the hand such as the fingers on one or more strings near the bridge of the instrument. The strings themselves can be modelled as a continuum of infinitesimally small mass-spring-damper systems where the damping constant is much smaller than the resonant frequency, creating damped oscillations (see below). See also Vibrating string.
Example: mass-spring-damper
An ideal mass-spring-damper system with mass m (in kilograms), spring constant k (in newtons per meter) and damper constant R (in newton-seconds per meter) can be described with the following formulae:
Treating the mass as a free body and applying Newton's second law, we have:
where a is the acceleration (in meters per second2) of the mass and
is the displacement (in meters) of the mass relative to a fixed point of reference.
Differential equation
The equations of motion combine to form a second-order differential equation for displacement x as a function of time t (in seconds):
Rearranging, we have
Next, to simplify the equation, we define the following parameters:
and
The first parameter,
, is called the (undamped) natural frequency of the system.
The second,
, is called the damping factor. Both parameters represent angular frequencies and have for units of measure radians per second.
The differential equation now becomes:
Continuing, we can solve the equation by assuming
- where
is, in general, a complex number.
Substituting this assumed solution back into the differential equation, we obtain:
Solving for , we find:
System behavior
The behavior of the system depends on the relative values of the two fundamental parameters, the natural frequency ω0 and the damping factor α.
Critical damping
When ,
is real and the system is critically damped. An example of critical damping is the door-closer seen on many hinged doors in public buildings.
Over-damping
When ,
is still real, but now the system is said to be over-damped. An overdamped door-closer will take longer to close the door than a critically damped door closer.
Under-damping
Finally, when ,
is complex, and the system is under-damped. In this situation, the system will oscillate at the damped frequency, which is a function of the natural frequency and the damping factor.
The solution can be generally written as:
where
represents the damped frequency of the system, and A and
are determined by the initial conditions of the system (usually the initial position and velocity of the mass).
See also
- RLC circuit
- Oscillator
- Harmonic oscillator
- Simple harmonic motion
- Resonance
This page uses Creative Commons Licensed content from Wikipedia (view authors). |